Ceiling fans are a wonderful accent to any room decor.  These days, most come complete with attached light fixture, making it both attractive and practical.  And though they’re known for helping to keep your house cool in the summertime, they can also help circulate the warm air in the winter.  Today, we’re going to talk about how to install a ceiling fan with light fixture into you home.

First of all, you’ll notice that all ceiling fans come with complete instructions and parts list.  Run through your list and ensure that all the pieces are accounted for.  This is also a good time to decide whether you want your fan set directly against the ceiling, or if you’d rather use the extension rod.  These rods are a great asset for larger rooms.

Next, you’ll need to remove the existing light fixture.  The safest way to do this, is by turning on the light then shutting off the power from the electrical box.  Even after you’ve shut off the power, it’s a good idea to test the wires with a voltage tester.  Once you’ve completed this, disconnect your wires.  Take stock in which colored wires go where.  Most wires will already be color coded.  However, if they’re not, you can use colored tape or even nail polish to differentiate your wires.

For the direct ceiling mounted option, attach the ceiling mount to the fan motor.  It’s a good idea to make sure that the ceiling trusses are sturdy enough to hold the weight of the fan.  Now it’s time to reattach your wires.  Your instructions will tell you which colored wire runs which option.  The wires with your fan may not be the same colors as those coming from your ceiling, so you’ve got to know which is which.

Once your wires are reconnected, you should test them to make sure that they’re sending power to the right place.  Be sure to cap all your wires before tucking them into the housing unit.  Your kit should come with wire caps, but if not, they can be purchased for next to nothing at any local hardware store.

Once the mount is in place, it’s time to add your fan blades.  Many fans come with dual-sided blades, giving you and option in decor.  Choose which side you want to use, then mount the blades to the arm extensions provided in the kit.  Each blade will attach to the arm with two or three small bolts.  Now, add them to your fan, ensuring that the bolts are secured.

Finally, add your light bulbs and check to see that all is in place.  Make sure to use the proper bulbs in your ceiling fan light fixture, as the wrong wattage can cause safety issues.  If you go through your directions carefully, and take the time to make sure all your components are in order, this should be a relatively easy project.

Thanks for reading my article titled, "How To Install A Ceiling Fan With Light Fixture. I hope that you enjoyed reading it.

What To Do Next?

• Share your thoughts in the comments below
• Contact me to schedule a home inspection
• Subscribe to my Home Inspection Blog using the form below