Archive for August, 2009

How To Update Your Home Fireplace

Monday, August 24th, 2009

Nearly all older homes have at least one fireplace within.  As a home ages, updates are needed to keep the fireplace safe and up to code.  And in some homes, the fireplace is more for looks than for use.  Whatever the case, there are several ways in which to make your fireplace both useful and attractive.

One way to improve the look of your fireplace is by replacing the bricks.  New bricks will give your fireplace a brighter look, but that’s not all.  Older bricks can crack from heat over time and could end up allowing smoke to filter out.  Another option is to add decorative rock around the older bricks.  This will give your fireplace a more modern look and improve the property values of your home.

For a more authentic feel, some people use river rocks around their fireplaces.  However, you don’t have to visit your local river to obtain this material.  You can pick up river rocks at most home improvement stores or at any earth moving company.  Also, you can purchase faux river rock face that gives the appearance of real rock, but is usually made out of cement or some type of fireproof material.

There are many homes that have fireplaces that no longer work.  Some have even been designed into the home plan, though they have no chimney.  They are strictly to add a bit of flair to the room.  These are a designers dream, as you can use just about any type of materials in the design.  They can be painted to look overtly modern, or decorated to look as though hundreds of years old.

One of the key piece that defines a fireplace is the mantle.  Again, design comes down to personal taste.  Some people prefer a wooden mantle, while others prefer something made of stone, or even granite.  For a working fireplace, it’s best to consult with a professional.  However, for something more ornamental, your options are limited only by your imagination.  Keep an eye out for homes being demolished.  This could be a great place to find an old fireplace mantle, or for antique wall moldings that would make any mantle seem older than its actual age.

Whether you want an antique look, or something more modern, there are several ways to update the look and feel of your home fireplace.  It doesn’t matter if it is a working model or not, a beautiful fireplace can add warmth to any home.

Ways To Winterize Your Home

Saturday, August 15th, 2009

It won’t be long and winter will be upon us.  However, now is the best time to start to think about winterizing your home.  If you get a few of these projects done while its still warm outside, it will make them easier to do.  There are a lot of different things you can do in order to start getting your home ready for the colder weather, and here are just a few.

1.) Check and Change Your Heater Filters
Before you crank up the furnace in your home, it’s a good idea to see if it needs to be cleaned or simply replaced.  First of all, it depends on the types of materials used to make the filters.  If it’s a cardboard filter, it was made to be disposable and will need to be replaced.  However, if your filter is reusable, you can clean it and replace it.  Start out by vacuuming out the dust and debris from the previous year.  Next, wash it warm water, then allow to dry.  Sitting it outside in the sun is the best option.  Finally, vacuum up any debris inside the furnace and around the base.  Now, your furnace is ready for another long winter.

2.) Wrap Your Water Pipes
One of the biggest problems with cold weather is bursting pipes.  In areas where the night-time temperatures can fall well below freezing, wrapping your water pipes is a must.  Some people leave a small trickle of water running at night to keep the water from freezing, but this just wastes water.  You can buy foam wrapping for your pipes from any home improvement store, for almost nothing.  If you’d rather use things around your home, wrap your pipes in old rages or mismatched socks, then apply a healthy amount of duct tape to keep them in place.  This will help keep your pipes warm, and your basement dry.

3.) Check Water Heater Insulation
Another item in your home that needs to be winterized is your hot water heater.  Though all modern heaters are insulated on the inside, finding ways of keeping the cold off the outside is important.  If your hot water heater is in a drafty basement, you can purchase hot water heater wraps from your local hardware store.  Those that live in mobile homes will want to go the extra mile and add an extra layer of insulation to the door housing, as the heater is usually exposed to an exterior wall and only accessible from the outside.

4.) Check For Drafts
It’s never too early to think about sealing up leaks and drafts in your home.  They may not be as noticeable in the summer months, but in the winter, they can cause your heating bills to skyrocket.  Adding a bead of caulking around windows and faucets will keep drafts from entering your home.  Adding a door sweep to all your external doors will keep the cold air out in the winter, and adding foam insulators to your external electrical sockets will help save you a ton of money.

5.) Installing a Programmable Thermostat
Replacing your current thermostat with a digitally programmable one will help keep your home’s temperature at a constant rate.  It’s best to keep your thermostat set at about 68* in the winter time, as this will still allow you to feel warm indoors and keep your heating bills down.  They also give you the power of keeping other family members from cranking up the heat and forgetting to turn it back down.

Electric bills are always at their highest in the winter months, but getting ready ahead of time will help save you and your family a lot of money.  It’s never too early to get ready for winter, and it’s never been easier to stay ahead of the game.

How To Install A Ceiling Fan With Light Fixture

Monday, August 10th, 2009

Ceiling fans are a wonderful accent to any room decor.  These days, most come complete with attached light fixture, making it both attractive and practical.  And though they’re known for helping to keep your house cool in the summertime, they can also help circulate the warm air in the winter.  Today, we’re going to talk about how to install a ceiling fan with light fixture into you home.

First of all, you’ll notice that all ceiling fans come with complete instructions and parts list.  Run through your list and ensure that all the pieces are accounted for.  This is also a good time to decide whether you want your fan set directly against the ceiling, or if you’d rather use the extension rod.  These rods are a great asset for larger rooms.

Next, you’ll need to remove the existing light fixture.  The safest way to do this, is by turning on the light then shutting off the power from the electrical box.  Even after you’ve shut off the power, it’s a good idea to test the wires with a voltage tester.  Once you’ve completed this, disconnect your wires.  Take stock in which colored wires go where.  Most wires will already be color coded.  However, if they’re not, you can use colored tape or even nail polish to differentiate your wires.

For the direct ceiling mounted option, attach the ceiling mount to the fan motor.  It’s a good idea to make sure that the ceiling trusses are sturdy enough to hold the weight of the fan.  Now it’s time to reattach your wires.  Your instructions will tell you which colored wire runs which option.  The wires with your fan may not be the same colors as those coming from your ceiling, so you’ve got to know which is which.

Once your wires are reconnected, you should test them to make sure that they’re sending power to the right place.  Be sure to cap all your wires before tucking them into the housing unit.  Your kit should come with wire caps, but if not, they can be purchased for next to nothing at any local hardware store.

Once the mount is in place, it’s time to add your fan blades.  Many fans come with dual-sided blades, giving you and option in decor.  Choose which side you want to use, then mount the blades to the arm extensions provided in the kit.  Each blade will attach to the arm with two or three small bolts.  Now, add them to your fan, ensuring that the bolts are secured.

Finally, add your light bulbs and check to see that all is in place.  Make sure to use the proper bulbs in your ceiling fan light fixture, as the wrong wattage can cause safety issues.  If you go through your directions carefully, and take the time to make sure all your components are in order, this should be a relatively easy project.

How To Install A Dimmer Switch

Monday, August 3rd, 2009

Many homeowners are always looking for ways to improve their property values, while still saving money. One simple way to do both is by installing a dimmer switch in place of your typical light switches. It’s a relatively easy task, but there are a few things to remember when taking on the job. It’s always a good idea to contact your local building inspector to see if you’ll need a permit before starting.

Once you’re ready to begin, make sure you have the right tools for the job. You’re going to need a pair of needle nose pliers, electrical tape, a screwdriver, and a voltage tester. The most important part of the entire job is in making sure to shut off power to switch. The easiest way to determine which circuit to shut off is by turning on the light you intend to work with and shut each circuit off and on until you come across the correct one. If you’re circuit board runs on fuses, apply the same method.

Next, you’ll need to remove the switch plate from the wall. Remove the plate, then gently remove the switch. This is where you’ll want to use your voltage tester. Make sure your wires are dead before moving on. Once you’ve determined this, disconnect the switch wires from the wall wires. Check to make sure that the wires coming from the wall are still in good shape, and make sure that there is a ground wire.

Add you new dimmer switch and reconnect the wires. Add plastic wire caps to all your connection, then add your cover plate. You should have gotten one that fits correctly with you dimmer switch kit. Screw in place and add the dimmer knob. Now, it’s time to turn the circuit back on to see if everything works correctly.

Before starting this, or any home improvement project, you should check to see if there are any codes that need to be met. Your local building inspector will know everything that needs to be updated, and will be more than happy to help out. Also, if during this procedure, you notice that you have aluminum wires instead of copper wires, call a professional immediately.

If done correctly, this project will add a touch of class to your home decor and will help you save money on your electrical bills. And, in the long run, you can say that you did your part for the environment by saving energy.